· Equipped with a 10" abrasive disc
· Features advanced no-load breaks
· Water tube attachment included
· Sturdy, all-metal working platform
· Enclosed motor
· Self-cleaning design eliminates plaster and stone build-up
· Dimensions: 14” x 14” x 17” (Height x Width x Depth)
· Power: 110 volt, 50-60 hz, 7A standard (220 volt, 50-60 hz, 3A available upon request)
· Weight: 44lbs (20kg)
Features:
· Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap; open the valve
· Connect the waste-disposal tube to the unit
· Connect the power cord, and switch on the power switch (O=off, l=on).
· When braking, it is normal to hear clicking before the sand tablet stops.
· If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
· To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk,make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet).
NOTE: 110V products will need about 10 days for preparing the goods